Actual Size (H x W x D mm): 430 polished 495 x 495 x 48
Weight (kg): 1.8
Nominal Sizes: 20″ x 20″
20″ x 20″ Stainless Steel Grease Baffle Filters
Specifications – Frame with handles and drainage holes – Strong construction – Suitable for all commercial applications – Polished finish – Boxed quantity 6 – Easily cleaned by soaking or dishwasher
Airy is a sanitiser for air and surfaces. It is for use inside other equipment to reduce the microbial load and to purify the air.
View the certification and test results for Bioxigen on our Support pages.
The device activates oxygen molecules producing negative oxygen ions with an oxidation function and outstanding microbial and deodorizing effects.
It ia a compact solution for use within other devices (OEM) and apparatus. It has been developed over years to suit a range of applications including blast chillers, fan coil units, home or industrial exhaust hoods, air blades, furniture compartments (kitchen, walk-in closets, bathrooms), etc.
CE marked and TUV Product certified.
View our privacy policy.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
ARO BRIDA COMPACT DUCT FLANGE
Circular duct matching flange.
For installation with the COMPACT TCBB-TCBT and TTT ranges of in-line cased axial fans.
Available in standard sizes from 250mm to 710mm.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
Purity is one of the parameters involved in air treatment applications, in addition to temperature, humidity and air velocity. For this reason Sital Klima offers the possibility to integrate Bioxigen technology inside its products thanks to the module series represented in the figure above. The modules carry out a sanitizing action of the internal volume of the air handling units, there are different sizes available and they can be included in all units marked with the green label.
The sizing of the Bioxigen module is realized to guarantee that the unit is not going to be a polluting source, preventing in this way contamination risks and reducing maintenance/reclamation costs.
Bioxigen is positioned inside the units close to critical areas for bacterial growth:
filters, thus preventing the increase of pressure drop, cooling coils to counteract biofilm formation (condensate + microdust + micro organisms), humidifiers, drop eliminators, drain pan, heat exchangers, also all the surfaces of the internal components and the inner panels take advantage from the continuous sanitizing action.
The modules are available in several models and are included in all air handling units upon request.
Enquire about Bioxigen sanitisation
View our privacy policy.
Energy Recovery Unit
This unit has:
Galvanized steel self-supporting panels, insulated on the inside and out; accessibility from side door.
ISO 16890 ePM2.5 95% efficiency class filter with synthetic cleanable media and COARSE 50% pre-filter on fresh air, COARSE 50% filter on return air intake.
Integrated pressure switch for dirty filter signal.
Motorised heat recovery by-pass device, controlled automatically by the unit control to use fresh air free-cooling when suitable.
Low consumption, high efficiency and low noise direct driven fans with 3-speed EC motors.
Duct connections by circular plastic collars.
Built-in electric box equipped with PCB to control fan and by-pass function.
Supply section for VRF system complete with DX (R410A) coil with copper tubes and aluminium fins, fitted with thermostatic valve, refrigerant filter, sensors on liquid and gas line, temperature sensors upstream and downstream airflow
Built-in PCB to control fan speed and air temperature (a remote control panel is possible as an option), flexible interfacing to the AHU kit.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
Galvanized steel self-supporting panels, internally and externally insulated; accessibility from side door.
ISO 16890 ePM2.5 95% efficiency class filter with synthetic cleanable media and COARSE 50% pre-filter on fresh air, COARSE 50% filter on return air intake.
Integrated pressure switch for dirty filter signal.
Motorised heat recovery by-pass device, automatically controlled by unit control to use fresh air free-cooling when convenient.
Low consumption high efficiency & low noise direct driven fans with 10-speed EC motors.
Duct connections by circular plastic collars.
Built-in electric box equipped with PCB to control fan and by-pass function.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
Energy Recovery Ventilation and built in DX coil – 3 models available
Constant air flow fans available as an option.
Ceiling horizontal installation, the heat exchanger is extractable from below for all models.
Main unit case made by sandwich panels 23 mm thickness, galvanized inner skin and prepainted outer skin ; 45 kg/m3 density foamed polyurethane as heat and sound insulation.
Supply section for VRF system complete with DX (R410A) coil with copper tubes and aluminium fins, fitted with thermostatic valve, refrigerant filter, sensors on liquid and gas line, temperature sensors upstream and downstream airflow. Sheet metal casing internally insulated by thermoacoustic material, complete with stainless steel drain pan.
Full-range controlled direct driven double inlet centrifugal fans with low consumption EC technology motors.
Filtering sections composed by cell filters with polypropylene media, extractable from side removable panels, ISO 16890 ePM1 55% efficiency for the fresh air flow, and ePM10 55% efficiency for the exhaust air flow.
Integrated pressure switch for dirty filter signal.
Built-in PCB to control fan speed and air temperature (possible remote control panel as an option), flexible interfacing to the AHU kit.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
This is a duct sanitization system for use in the home and industrial/commercial air conditioning ducts.
How the Duct Sanitisation system works
The duct sanitization system works by reducing the microbial load in the air and on surfaces which in turn reduces the spread of bacteria. It also limits the growth of mould on walls and ceilings. The unit uses tested and certified Bioxigen® technology.
This system prevents pathogens from being carried through the air ducts in the building. This is the result of the impact ionization process; ( the condenser triggers controlled redox reactions on volatile organic compounds (VOC), thus reducing the amount of airborne pollutants)
The oxygen ions generated in the electric field allow sanitisation in all parts of the ducts.
Bioxigen® technology has been developed in conjunction with leading Universities and Research Institutes (University of Padova, University of Udine, Maugeri Institute, ARCHA laboratories and University of Pisa), with tests on the system’s effects
conducted even in the most critical conditions. See the Bioxigen Certificates here.
Models Types and Installation of the Duct Sanitisation system
Installation: The system can easily be installed in new or existing air ducts.
Suitable for use in the following room types:
bedrooms, bathrooms, studios, offices, shops, kitchens, waiting room, dentist’s surgeries, libraries, hairdressing and nail salons, public toilets, multi-purpose rooms, classrooms, product processing rooms and cellars.
Available in 3 models
The correct model to choose will depend on a number of factors, including room size and airflow rates.
Dimensions of all models: 350 x 400 x 210mm
BXMCB2T125:
Airflow rate: ≤ 250 m3/h
Power Consumption: 6 watts
BXMCC2T160:
Airflow rate: ≤ 600 m3/h
Power Consumption: 9 watts
BXMCC4T200:
Airflow rate: ≤ 1200 m3/h
Power Consumption: 18 watts
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-180 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-200 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-225 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-250 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-315 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHB-4-400 F400 – 120 SINGLE PHASE ROOF MOUNTED CENTRIFUGAL FAN (220-240V)
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-180 F400-120, 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-200 F400-120, 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-225 F400-120, 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-250 F400-120, 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-315 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-400 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (Except 180 and 200 models).
Applications include
– General ventilation – Industrial ventilation
– Industrial / Commercial kitchens
Suitable for air stream temperatures from -40°C to 120°C.
– Base manufactured from galvanised sheet steel.
– Backward curved centrifugal impellers
-To prevent accumulation of dirt. Models up to 400 are manufactured from galvanised steel sheet.
-Models from 450 to 630 in sheet steel protected against corrosion by cataphoresis primer and black polyester paint finish.
– Cowl manufactured from spun aluminium.
– All models incorporate bird-proof guard
– Available, depending on the model, in 4, 6 or 4/8 poles.
Motors
CTHB Models- Single-phase, single-speed motor 220-240V50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by voltage**.
CTHT Models – Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*.
Speed controllable by frequency inverter and by voltage**.
– Three-phase 2-speed motor 380-4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
* When thermal protection is connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Only F400-120 at maximum fan speed.
Additional information
180N, 200N and 225N models are specially designed for extracting smoke from fireplaces.
Certified to EN12101-3 Standards.
– Sealed controllable in single and three phase for models 140-400.
– Sealed for life ball bearing assemblies.
In three phase voltage, the motors can be operated in connection at 380-415, which allows two speed operation of the fans.
Enquire about CTHT-4-450 400V 3 PHASE ROOF MOUNTED CENTRIFUGAL FAN
View our privacy policy.
The CTS series air handling units have been designed taking into account the evolution in building design, architecture matters and the idea to be compact AIR, meeting the increasingly restrictive requirements to fill up less room. From this standpoint the CTS series progresses, having as fundamental the criterion of less space/lower cost, while maintaining the objective to fulfill the widest range of technical-systems requirements. The CTS series units are made in compliance with the relevant European directives and are available in 16 standard sizes, from 01 to 10 with square cross-section and 11 to 16 with rectangular cross-section, covering a range of standard air flow-rates from 1000 up to 80000 m3/h.
Eurovent Certification attests the performances of operating equipment in the air treatment industry, and also in the air conditioning and refrigeration field, in accordance with European and international standardsed based on specific requirements.
Sustainable option: This AHUs can be upgraded to a more sustainable version. For these units, we build the Unit using an FE System electrostatic precipitator (filter) instead of a tradtional bag or pocket filter. These FE system precipitators have been given an A+ energy rating by Eurovent, compared to a C rating for bag or pocket filters. This results in lower energy usage and reduced landfill waste and maintenance time.
Enquire about CTS – Air Handling Units AHU
View our privacy policy.
You can read all about EcoKitchen here.
EcoLight is a range of exhaust filtration units for smaller kitchens. It is available in 24 models. The models are different based on:
You can view more in the EcoLight Brochure here It contains information for each model re airflow, dimensions and components etc.
More Technical Data is available on this page under the Expansion Electronic section.
The FEL System filter installed as standard has been specifically designed for the removal of pollutants such as grease, smoke and odours thanks to pointed collection blades that allow the capture and collection of high quantities of oily pollutants.
Energy Saving is guaranteed as energy consumption is 3 times lower than that of a mechanical filter with equal filtration efficiency: this is mainly due to the low pressure drops almost constant over time, 64 Pa even when the filter is completely dirty. The low energy consumption of the ECOLIGHT units is also guaranteed by the use of an electronic motor instead of a belt motor.
They are equipped with 3-stage prefiltration which is completely removable and washable. Installation of both an ionisation cell FI and an ozonation cell FX before the activated carbon provides a hygienic and antibacterial effect and at the same time reduces odours.
The unit uses active labyrinth carbons with low pressure drops and high performance. It consists in granular coconut/bamboo carbon.
The ECOLIGHT can be supplied to be wired or fully wired ready for use, including an electrical control panel.
The structures are presented in self-supporting aluminum profiles, with external 25 mm sandwich panels. Their body is made up of a single block that contains all the components inside it.
The ECOLIGHT units can be installed on the wall, on the ceiling or on the floor and are equipped with a folding, flag or removable door.
The installer will not have to provide any drainage system since the units are equipped with a removable tray designed to collect the oil captured by the electrostatic filter.
Energy Recovery Ventilation Unit
Constant air flow fans available on CFR-PHEE+ 100N-320N.
Ceiling horizontal installation, the heat exchanger is extractable from below for all models.
Case made by sandwich panels 23 mm thickness, galvanized inner skin and prepainted outer skin; 45 kg/m3 density foamed polyurethane as heat and sound insulation.
Full-range controlled direct driven double inlet centrifugal fans; CFR-PHEE+ version with low consumption EC technology motors available.
Filtering sections composed by cell filters with polypropylene media, extractable from side removable panels, ISO 16890 ePM1 55% efficiency for the fresh air flow, and ePM10 55% efficiency for the exhaust air flow.
Integrated pressure switch for dirty filter signal.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
FE150RV Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses
See the full FE System Brochure here.
Key Information re Model FE150RV
Size in mm: 287 W x 287 H x 218 D
Weight: 8 kg
Energy Consumption: 9 W
Accumulation Capacity: 150g
Annual Energy Consumption KWh/Y : 170
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE150RV Electrostatic Filter
View our privacy policy.
FE250 Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses
See the full FE SYSTEM Brochure here.
Key Information re Model FE250
Size in mm: 287 Wx 490 H x 218 D
Weight: 8 kg
Energy Consumption: 9 W
Accumulation Capacity: 216g
Annual Energy Consumption KWh/Y : 256
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE250 Electrostatic Filter
View our privacy policy.
FE250RV Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE250RV
Size in mm: 490 W x 287 H x 218 D
Weight: 8 kg
Energy Consumption: 9 W
Accumulation Capacity: 216g
Annual Energy Consumption KWh/Y : 170
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE250RV Electrostatic Filter
View our privacy policy.
FE300 Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE300
Size in mm: 287 W x 592 H x 218 D
Weight: 10 kg
Energy Consumption: 9 W
Accumulation Capacity: 280g
Annual Energy Consumption KWh/Y : 341
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features of FE300:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents.
Enquire about FE300 Electrostatic Filter
View our privacy policy.
FE300RV Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE300RV
Size in mm: 592 W x 287 H x 218 D
Weight: 9 kg
Energy Consumption: 9 W
Accumulation Capacity: 280g
Annual Energy Consumption KWh/Y : 213
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features of FE300:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE300RV Electrostatic Filter
View our privacy policy.
FE450 Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles an deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE450
Size in mm: 490 W x 490 H x 218 d
Weight: 14 kg
Energy Consumption: 16 W
Accumulation Capacity: 378g
Annual Energy Consumption KWh/Y : 448
FE SYSTEM electrostatic filters have been certified according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features of FE450:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE450 Electrostatic Filter
View our privacy policy.
FE500 Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE500
Size in mm: 490 W x 490 H x 218 D
Weight: 16 kg
Energy Consumption: 16 W
Accumulation Capacity: 494g
Annual Energy Consumption KWh/Y : 590
FE SYSTEM electrostatic filters have been certified according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been tested and certified by various institutions to the highest international standars as presented below.
Main features of FE500:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents
Enquire about FE500 Electrostatic Filter
View our privacy policy.
FE500 Electrostatic Filter, rated A+ class for energy by Eurovent, kills off harmful particles and deactivates viruses.
See the full FE SYSTEM Brochure here.
Key Information re Model FE500
Size in mm: 490 W x 490 H x 218 D
Weight: 16 kg
Energy Consumption: 16 W
Accumulation Capacity: 494g
Annual Energy Consumption KWh/Y : 590
FE SYSTEM electrostatic filters have been certified according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been tested and certified by various institutions to the highest international standars as presented below.
Main features of FE500:
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents.
Enquire about FE550 Electrostatic Filter
View our privacy policy.
The electrostatic precipitator (filter) FE600 SYSTEM has an A+ energy class rating, has been certified to EN ISO 16890 and it kills off harmful particles and deactivates viruses
See the full FE SYSTEM Brochue here.
Key Information about Model FE600
Size in mm: 592 W x 592 h x 218 D
Weight: 19kg
Energy Consumption: 16 W
Accumulation Capacity: 600
Annual Energy Consumption: 702 KWh/Y
FE SYSTEM electrostatic filters have been certifed according to EN ISO 16890, which determines the new classification of filtration for air filters for general ventilation.
FE SYSTEM electrostatic filters have been certified and tested by various institutions to the highest international standards as presented below.
Main features:
standard dimensions, according to standard sizes of pocket filters 592×592 and 592×287 (according to EN 15805);
incorporated electric circuit, waterproof isolated to be cleaned in water;
multipolar connection suitable for the network supply (230V-50/60Hz) as well as for several parallel;
a self-centering system which allows it to compensate for manufacturing intolerances up to 3 mm;
remote control/signal functioning from external PLC display or directly from the led in the filter.
Performance:
high efficiency filtration on particles of 0,3-0,4 micron, comparable to class E10, E11 efficiency according to EN 1822:2009, and to filtration classes ePM1, ePM2,5, ePM10 according to EN ISO 16890;
excellent solution to fight outside polluted air from PM10, PM2,5 and PM1 particles;
high reduction of bacteria and virus in the air;
excellent protection of the heat exchanger and of the air pipes from obstruction of polluting agents.
Enquire about FE600 Electrostatic Filter
View our privacy policy.
This frame is designed for FE System electrostatic filters, in standardized dimensions of :
610 x 610 mm (24 ’’ x 24 ’’),
610 x 305 mm (24 ’’ x 12 ’’) and
305 x 610 mm (12 ’’ x 24 ’’).
It is made of galvanized sheet metal and is equipped with gaskets for air tightness and special screw-type filter stops. This type of frame is capable of holding the weight of electronic filters without being damaged.
It can be used to make various combinations of horizontal or vertical electrostatic filters.
Enquire about Frame Holder for FE System electrostatic filters
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-250-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-315-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-355-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-400-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-450-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-500-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-560-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-630-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBT-4-250-H-400V 3 Phase Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBT-4-315-H-400V 3 Phase Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBT-4-355-H-400V 3 Phase Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-400-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-450-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-500-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-560-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBB-4-630-H-230V Plate mounted axial flow fan
View our privacy policy.
Range of low-profile plate mounted axial flow fans fitted with aluminium impellers and single phase motors (HCBB) or 3 phase motors (HCBT).
IP65 (Models 800, 900 and 1000 are IP55).
Class F insulation (Working temperatures from -40ºC up to +70ºC. Except models Ø 800, 900 and 1000 suitable for usage in environments from -20ºC to +40ºC),
Equipped with thermal protection (Except models Ø 800 to 1000).
Motors
Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
Electrical supplies:
Single phase 220-240V-50Hz. (Capacitor located inside the wiring terminal box).
Three phase 220-240/380-415V-50Hz or 400V-50Hz (See characteristic chart).
Enquire about HCBT-4-710-H-400V 3 Phase Plate mounted axial flow fan
View our privacy policy.
Series of 3 models
(standard CRE-PEL, CRE-PWW, CRE-PEP) for nominal accumulation capacity of 270 liters, composed of :
Steel tank with a double layer vetrification.
High thickness foamed polyurethane insulation.
External lower cover in grey ABS.
Air-to-water heat pump system (R134a) composed of hermetic rotary compressor, condenser wrapped outside the boiler free from fouling and freon-to-water contamination, air evaporating finned coil, adjustable flow radial fan; upper cover in black ABS.
Auxiliary electric heater automatically switched depending on outside air temperature.
Anti-corrosion magnesium anode.
Auxiliary coil for use in combination to boiler or solar panels (CRE-PWW).
Double auxiliary coil for use in simultaneous combination to three different energy sources (CRE-PEP).
Built-in electronics with LCD display.
Electronic control
User display for operating modes settings.
Smart self-diagnosis for alarms check.
Operating time recording.
Setting of set-point water temperature for Automatic and/or Manual operating mode.
Management of the defrost cycle.
Management of the anti-bacterial cycle, for elimination and preventing the formation of legionella.
Automatic activation of alternative energy source.
Enquire about Heat Pump Compact CRE – SIC
View our privacy policy.
Constant air flow fans available on CFRE+100N – 500N.
Built in by-pass facility.
Case made by sandwich panels 23 mm thickness, galvanized inner skin and prepainted outer skin; 45 kg/m3 density foamed polyurethane as heat and sound insulation.
Full-range controlled direct driven double inlet centrifugal fans; low consumption EC technology motors on CFRE+.
Filtering sections composed by cell filters with polypropylene media, extractable from side removable panels, ISO 16890 ePM1 55% efficiency for the fresh air flow, and ePM10 55% efficiency for the exhaust air flow.
Integrated pressure switch for dirty filter signal.
Condensate drain pan made of galvanized steel plate with water drain connection downwards, that ensure a total drainage.
Constant air flow fans available on CFRE+90 100N – 500N.
Built in by-pass facility.
Case made by sandwich panels 23 mm thickness, galvanized inner skin and prepainted outer skin; 45 kg/m3 density foamed polyurethane as heat and sound insulation.
Full-range controlled direct driven double inlet centrifugal fans; low consumption EC technology motors on CFRE+90. Very high efficiency controlled direct driven, double inlet backward curved centrifugal fans with EC motor on CFRE+ 400-500N models.
Filtering sections composed by cell filters with polypropylene media, extractable from side removable panels, ISO 16890 ePM1 55% efficiency for the fresh air flow, ePM10 55% efficiency for the exhaust air flow.
Integrated pressure switch for dirty filter signal.
Condensate drain pan made of galvanized steel plate with water drain connection downwards, that ensure a total drainage.
Constant air flow fans available on CFRE+100N – 500N.
Built in by-pass facility.
Case made by sandwich panels 23 mm thickness, galvanized inner skin and prepainted outer skin; 45 kg/m3 density foamed polyurethane as heat and sound insulation.
Full-range controlled direct driven double inlet centrifugal fans; low consumption EC technology motors on CFRE+.
Filtering sections composed by cell filters with polypropylene media, extractable from side removable panels, ISO 16890 ePM1 55% efficiency for the fresh air flow, and ePM10 55% efficiency for the exhaust air flow.
Integrated pressure switch for dirty filter signal.
Condensate drain pan made of galvanized steel plate with water drain connection downwards, that ensure a total drainage.
Series of 3 models to cover up to 800 m3/h airflow rate, for floor installation and composed of :
Series of 3 models to cover up to 700 m3/h airflow rate, for floor installation and composed of :
-Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation.
-ISO 16890 ePM10 50% efficiency filters on both air intakes; as an
option and in place of standard type, ePM1 70% compact filter in polypropylene with low air pressure drop.
-Air-to-air counterflow polystyrene heat recovery with very high efficiency (up to 95%), already equipped with motorised by-pass device and easily removable for cleaning.
-Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
-Front plastic collars fitted with additional airtight rubber gasket.
-Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable).
-Wireless control panel and sensors.
“Series of 2 models for ceiling/false ceiling installation or vertical wall installation and composed of:
Casing and cover panel made from expandend polypropylene, fitted.
with external reinforcement plates for airtight closing and for ceiling/wall mounting; internal aerodynamic shape able to minimize air pressure drops and rustles.
ISO 16890 ePM10 50% efficiency filters on both air intakes; as an option, additional ePM1 70% compact filter in polypropylene with low air pressure drop.
Air-to-air counterflow very high efficiency polystyrene heat recovery equipped with motorised by-pass device.
Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
Plastic collars fitted with additional airtight rubber gasket.
Heat recovery equipped with motorised by-pass device.
Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable).
Wireless control panel and sensors.”
Enquire about Heat Recovery Home ReVent PRH – OxyVent PRH
View our privacy policy.
| The PCUS regulator is a flexible regulation system for the management of numerous functions required in the heat recovery units.
The system consists of a hardware board with digital and analogue inputs and outputs and a display connected with a 4-wire bus system that allows communication with the electronic board. The display can be installed in a three-module junction box (type 503) and at a maximum distance of 15 meters from the electronic boards. The cable (recommended) to be used is a shielded 4-wire cable with a section of 0.5 sqmm. |
Series for vertical floor or wall-mounting installation, composed of:
-Casing and cover panel made from expandend high density polypropylene, with internal aerodynamic shape able to minimize air pressure drops and rustles
-ISO 16890 ePM1 70% filter in polypropylene with low air pressure drop.
-Air-to-air counterflow polystyrene, heat recovery with high efficiency equipped with motorised by-pass device (total flow on 350, 500 and 600).
-Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
-Reversible duct connection between outdoor side to ambient side.
-Built-in electronic control complete with temperature probe inside the unit and plug-in type user interface.
Wireless remote user control panel and wireless sensors in option.
Enquire about Heat Recovery Residential ReVent MRN – OxyVent MRN
View our privacy policy.
Series of 3 models to cover up to 800 m3/h airflow rate, for floor installation and composed of:
Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation.
ISO 16890 ePM10 50% efficiency filters on both air intakes; as an option and in place of ePM10 50% type, ePM1 70% compact filter in polypropylene with low air pressure drop.
Hygroscopic aluminium enthalpic thermal wheel with very high efficiency (both temperature and moisture), equipped with low energy consumption induction motor and driven by pulley and belt. Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
Front plastic collars fitted with additional airtight rubber gasket.
Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable).
Wireless control panel and sensors.
Series of 3 models to cover up to 700 m3/h airflow rate, for floor installation and composed of:
Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation.
ISO 16890 ePM10 50% efficiency filters on both air intakes; as an
option and in place of standard type, ePM1 70% compact filter in polypropylene with low air pressure drop.
Air-to-air counterflow polystyrene heat recovery with very high efficiency (up to 95%), already equipped with motorised by-pass device and easily removable for cleaning.
Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
Front plastic collars fitted with additional airtight rubber gasket.
Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable).
Wireless control panel and sensors.
Series consisting of 8 models, two of which recessed wall vertical and four horizontal, all isothermal with and without cold integration and two horizontal in cooling only version, consisting of:
Zink sheet metal casing, internally insulated.
Intake air ISO 16890 COARSE 50% synthetic filter.
Water precooling and evaporating coil with copper tube and aluminum fins, provided with hydrophilic treatment.
For isothermal version (DHS), water condensing and post-cooling coil with copper pipes and aluminum fins with hydrophilic treatment
Water plate exchanger for only cooling version (DHS-C) or for integration version (DHS-I).
R134A reciprocating hermetic compressor and expansion capillary.
Super silent forward curved double inlet fan directly driven by single phase 3-speed motor (one wired).
Electronic PCB with display and leds for management and control of all operating functions.
DHRN units are designed for use in residential and commercial environments where the cooling is made by ceiling / wall / floor radiant systems. The DHRN A version is air-cooled, while the DHRN W version is water-cooled. DHRN units combine high efficiency heat recovery capacity to dehumidification treatment of the airflow to be supplied to the room, generally mixing of fresh air coming from outdoor and recirculated air coming from indoor cleanest rooms.
That’s possible thanks to a pretreatment phase, whose heat transfer fluid is the water coming from radiant system that passes through a finned coil, and a later phase whose transfer fluid is the refirgerant gas that flows in a standard refrigeration circuit by compressor (the last one activated only on summer mode).
On winter mode (compressor off), in addition to heat recovery capacity,
the air to be supplied is also further heated by finned coil, supplied by
water plant of radiant system.
Series consisting of 8 models, two of which recessed wall vertical and four horizontal, all isothermal with and without cold integration and two horizontal in cooling only version, consisting of:
Zink sheet metal casing, internally insulated.
Intake air ISO 16890 COARSE 50% synthetic filter.
Water precooling and evaporating coil with copper tube and aluminum fins, provided with hydrophilic treatment.
For isothermal version (DHS), water condensing and post-cooling coil with copper pipes and aluminum fins with hydrophilic treatment
Water plate exchanger for only cooling version (DHS-C) or for integration version (DHS-I).
R134A reciprocating hermetic compressor and expansion capillary.
Super silent forward curved double inlet fan directly driven by single phase 3-speed motor (one wired).
Electronic PCB with display and leds for management and control of all operating functions.
| Series for vertical floor or wall-mounting installation, composed of: Casing and cover panel made from expandend high density polypropylene, with internal aerodynamic shape able to minimize air pressure drops and rustles. ISO 16890 ePM1 70% filter in polypropylene with low air pressure drop. Air-to-air counterflow polystyrene, heat recovery with high efficiency equipped with motorised by-pass device (total flow on 350, 500 and 600). Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors. Reversible duct connection between outdoor side to ambient side. Built-in electronic control complete with temperature probe inside the unit and plug-in type user interface. Wireless remote user control panel and wireless sensors in option. |
Series of 2 models for ceiling/false ceiling installation or vertical wall installation and composed of:
Casing and cover panel made from expandend polypropylene, fitted
with external reinforcement plates for airtight closing and for ceiling/wall mounting; internal aerodynamic shape able to minimize air pressure drops and rustles.
ISO 16890 ePM10 50% efficiency filters on both air intakes; as an option, additional ePM1 70% compact filter in polypropylene with low air pressure drop.
Air-to-air counterflow very high efficiency polystyrene heat recovery equipped with motorised by-pass device.
Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
Plastic collars fitted with additional airtight rubber gasket.
Heat recovery equipped with motorised by-pass device.
Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable).
Wireless control panel and sensors.
Structure made from galvanized steel sheet metal with perforated inner panels and glass wool (50 mm thick) sound insulation.
Galvanized steel collars to fit circular air ducts.
Direct driven double inlet multi-speed EC centrigual fan.
The RFS-HP and SPR series units have been designed to ensure high performance heat recovery by combining a static heat recovery unit and a refrigerant circuit (heat pump) within the same air handling unit. The static heat exchanger transfers heat from the exhaust air to the fresh inlet air, thus significantly reducing the time the refrigerant circuit needs to operate throughout the year, bringing a significant advantage in terms of energy savings. If required by the outside and inside temperature conditions, the refrigerant circuit operates in heat pump mode to transfer the heat removed from the exhaust air from the evaporator to the condenser.
These air handling units thus represent the ideal solution for satisfying temperaturehumidity comfort and fresh air requirements in air-conditioning systems operating in civil, industrial and service environments.
Enquire about Heat Recovery RFS-HP- SPR – Thermodynamic Recovery
View our privacy policy.
Structure made from galvanized steel sheet metal with perforated inner panels and glass wool (50 mm thick.) sound insulation.
Galvanized steel collars to fit circular air ducts.
Direct driven double inlet multi-speed EC centrigual fan.
Enquire about Heat Recovery unit for Homes ReVent WF – OxyVent WF
View our privacy policy.
Series consisting of 8 models, two of which recessed wall vertical and four horizontal, all isothermal with and without cold integration and two horizontal in cooling only version, consisting of:
Zink sheet metal casing, internally insulated.
Intake air ISO 16890 COARSE 50% synthetic filter.
Water precooling and evaporating coil with copper tube and aluminum fins, provided with hydrophilic treatment.
For isothermal version (DHS), water condensing and post-cooling coil with copper pipes and aluminum fins with hydrophilic treatment
Water plate exchanger for only cooling version (DHS-C) or for integration version (DHS-I).
R134A reciprocating hermetic compressor and expansion capillary.
Super silent forward curved double inlet fan directly driven by single phase 3-speed motor (one wired).
Electronic PCB with display and leds for management and control of all operating functions.
Enquire about Heat Recovery unit for Residential use – DH
View our privacy policy.
Series consisting of 8 models, two of which recessed wall vertical and four horizontal, all isothermal with and without cold integration and two horizontal in cooling only version, consisting of:
Aluzink sheet metal casing, internally insulated.
Intake air ISO 16890 COARSE 50% synthetic filter.
Water precooling and evaporating coil with copper tube and aluminum fins, provided with hydrophilic treatment.
For isothermal version (DRS), water condensing and post-cooling coil with copper pipes and aluminum fins with hydrophilic treatment
Water plate exchanger for only cooling version (DRS-C) or for integration version (DRS-I).
R513A reciprocating hermetic compressor and expansion capillary. The GWP (Global Warming Potential) of the R513A refrigerant gas is 573, a decrease of 56% compared to the value of R134A. The advantages of R513A also include energy saving and respect for the environment.
Super silent forward curved double inlet fan directly driven by single phase 3-speed motor (one wired).
Electronic PCB with display and leds for management and control of all operating functions.
Enquire about Heat Recovery unit for Residential use – DR
View our privacy policy.
This unit is available in a series of 5 models to cover up to 6000 m3/h airflow rate, for false ceiling
horizontal installation. It is made up of:
Aluzink sheet metal double skin panel 15 mm thick, insulated with a polyurethane layer.
3- or 6-row main water coil with copper tube and aluminium fins, provided with stainless steel internal drain tray.
Possibility of further optional 2-row internal water coil.
High pressure forward curved double inlet fan directly driven by single phase 3-speed motor; alternatively on UHPE, EC motor for higher performance and efficiency.
Standard ISO 16890 ePM10 50% synthetic filter; an additional ePM1 75% filter is optional
Electric box for connection to main power supply and control panel.
Sustainable option: This AHU can be upgraded a sustainable version. For these units, we build the Unit using an FE System electrostatic precipitator (filter) instead of a tradtional bag or pocket filter. These FE system precipitators have been given an A+ energy rating by Eurovent, compared to a C rating for bag or pocket filters. This results in lower energy usage and reduced landfill waste and maintenance time.
Enquire about High static air handling terminal unit – UHP UHPE
View our privacy policy.
The FI System negative ionisation cell has been created for installation inside air handling units or in air distribution ducts.
FI is a new development in air treatment and its installation after an electrostatic or high efficiency filtration system ensures better sterilisation and reduction of odours. It has a multiple pole connection system which ensures that a number of ionisation cells can be connected at the same time, based on the air flow and filtration requirements. Ionisation cells are installed and removed by simply sliding them across the air handling unit filter frame support.
Models: It is available in 6 different models, with varying power consumption, air flow capacity, dimensions and weight. See more info about each model in the Technical Data here.
The built-in electronic power input circuit is equipped with LEDs to notify the user that the filter is working correctly.
Enquire about Ionisation Cell FI System
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABB/4-3000/315 Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABB/4-4000/355 Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABB/4-6000/450 Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABT/4-12000/560 Three Phase Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABT/4-9000/500 Three Phase Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABT/4-4000/355 Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABT/4-6000/450 Backward curved centrifugal cabinet fan
View our privacy policy.
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the inlet.
KABB / KABT incorporates direct driven aluminium backward curved centrifugal impeller with motor fitted outside of the air stream.
Supplied with galvanized drip tray and copper drain.
Motors
– KABB: Single-phase 4 pole motor 230V-50Hz, IP55, class F, with thermal protection, speed controllable by tension.
Maximum temperature around the motor:
KABB/4-3000/315: 70ºC max airflow 2460 m3/hr
KABB/4-4000/355: 50ºC max airflow 3790 m3/hr
KABB/4-6000/450: 40ºC max airflow 5900 m3/hr
– From KABT/4-3000/315 to KABT/4-9000/500:
Three-phase 4 pole motor 230/400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
– KABT/4-12000/560:
Three-phase 4 pole motor 400V-50Hz, IP55, Class F, with thermal protection, speed controllable by inverter.
Additional information
Working temperature from -20ºC to 100ºC.
Backward curved centrifugal impellers
To prevent accumulation of dirtiness. Dynamically balanced.
Robustness
Quality finished plastic corners and aluminium profile, providing a great robustness.
IP55
remote terminal box
To ease installation and connection to external controls.
Enquire about KABT/4-9000/500 Three Phase Backward curved centrifugal cabinet fan
View our privacy policy.
DIMENSIONS (DxWxH): 545 x 1800 x 810
N° OF ESP ELECTROSTATIC FILTER: 1 FEL 300
AIRFLOW (speed passage 3 m/s): 1300 m3/h
EXTERNAL STATIC PRESSURE: 500 Pa
FAN: DDMP7/7T
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here
DIMENSIONS (DxWxH): 1250 x 2550 x 715
N° OF ESP ELECTROSTATIC FILTER: 2 FEL 600
AIRFLOW (speed passage 3 m/s): 5000 m3/h
EXTERNAL STATIC PRESSURE: 500 Pa
FAN: RAD 310
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1650 x 2550 x 715
N° OF ESP ELECTROSTATIC FILTER: 2 FEL 600 + 1 FEL 300
AIRFLOW (speed passage 3 m/s): 6000 m3/h
EXTERNAL STATIC PRESSURE: 600 Pa
FAN: RAD 355
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1350 x 2650 x 1460
N° OF ESP ELECTROSTATIC FILTER: 4 FEL 600
AIRFLOW (speed passage 3 m/s): 10500 m3/h
EXTERNAL STATIC PRESSURE: 1000 Pa
FAN: RAD 450
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1650 x 2650 x 1460
N° OF ESP ELECTROSTATIC FILTER: 4 FEL 600 + 2FEL 300
AIRFLOW (speed passage 3 m/s): 13000 m3/h
EXTERNAL STATIC PRESSURE: 800 Pa
FAN: 2x RAD 355
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1950 x 2650 x 1460
N° OF ESP ELECTROSTATIC FILTER: 6 FEL 600
AIRFLOW (speed passage 3 m/s): 15000 m3/h
EXTERNAL STATIC PRESSURE: 800 Pa
FAN: 2 x RAD 400
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1950 x 2650 x 2000
N° OF ESP ELECTROSTATIC FILTER: 9 FEL 600
AIRFLOW (speed passage 3 m/s): 25500 m3/h
EXTERNAL STATIC PRESSURE: 1000 Pa
FAN: 4 x RAD 400
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
DIMENSIONS (DxWxH): 1950 x 2550 x 715
N° OF ESP ELECTROSTATIC FILTER: 3 FEL 600
AIRFLOW (speed passage 3 m/s): 7650 m3/h
EXTERNAL STATIC PRESSURE: 800 Pa
FAN: RAD 400
EcoKitchen is an A plus rated, sustainable kitchen ecology unit system that eliminates grease, smoke and odour. EcoKitchen is an A+ rated (rated by EU Commission) kitchen ventilation system that is unrivalled in the marketplace due to its ability to separate and accumulate oil. This allow for a remarkable energy saving and low drop pressure, guaranteed by the electrostatic filters FEL system certified according to UL867. The FEL SYSTEM electrostatic filter installed inside EcoKitchen is certified to EN ISO 16890 and a host of other standards.
EcoKitchen is bespoke for your kitchen needs and can be retrofitted in your commercial kitchen. You can read our comprehensive EcoKitchen page here.
Suitable for residential or commercial
Particle Filtration levels of up to 96% on PM2.5
2 models – 330(for wall or ceiling) and 510 (wheeled)
3 Technology types with different functionality – the Nature System , AFC system and the Basic System (we will advise you when type is best suited to your room/building)
Remote control – 3 speeds and real -time function management , performance, alarms etc
Very low noise level 43 – 57 decibels depending on speed settings, (normal conversation decibels are approx. 60 decibels)
Aluminium Structure
Enquire about MonoLite Air Purifier for Home or Office
View our privacy policy.
0.37KW,2.3 AMPS, IP20, Single phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-120023-1F12 Optidrive E3 SINGLE PHASE IN/3 PHASE OUT DRIVE for 230v/400v Fan
View our privacy policy.
0.75KW,4.3 AMPS, IP20, Single phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-120043-1F12 Optidrive E3 SINGLE PHASE IN/3 PHASE OUT DRIVE for 230v/400v Fan
View our privacy policy.
1.5KW, 7 AMPS, IP20, Single phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-120070-1F12 Optidrive E3 SINGLE PHASE IN/3 PHASE OUT DRIVE for 230v/400v Fan
View our privacy policy.
0.75KW, 2.2 AMPS, IP20, 3 phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-140022-3F12 Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
1.5KW, 4.1 AMPS, IP66, 3 phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-140041-3F1B Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-240058-3F42 Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-240058-3F4B Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
4KW, 9.5 AMPS, IP20, 3 phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-240095-3F42 Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
4KW, 9.5 AMPS, IP66, 3 phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-240095-3F4B Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
5.5KW, 14.0 AMPS, IP66, 3 phase in – 3 phase out Drive
General Purpose Drive
Focused on ease of use, Optidrive E3 provides unrivalled
simplicity of installation, connection and commissioning,
allowing the user to benefit from precise motor control and
energy savings within minutes.
Low Power Applications
Dedicated to low power applications, Optidrive E3 combines
innovative technology, reliability, robustness and ease of use in a
range of compact IP20 & IP66 enclosures.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most
applications. Contactor style connection for simple wiring.
Optidrive E3 IP66
Environmentally protected, IP66 rated
models can be mounted directly on your
processing equipment.
Washdown Ready
With a sealed ABS enclosure and corrosion resistant heatsink,
Optidrive E3 IP66 models are ideal for high‑pressure
washdown applications.
On-drive Control
IP66 models feature optional, convenient controls for speed
control, REV/OFF/FWD and Power ON/OFF, complete with
safety lock.
Single Phase Motor Control
Optidrive E3 for Single Phase Motors provides accurate speed
control of single phase PSC or shaded pole motors. Special
boost phase ensures reliable starting, initially ramping the motor
voltage up to rated voltage whilst maintaining a fixed starting
frequency, before reducing the frequency and voltage to the
desired operating point.
Enquire about ODE-3-340140-3F4B Optidrive E3 3 PHASE IN/3 PHASE OUT DRIVE
View our privacy policy.
FX System Ozonation Cell for Air Sanitisation
The FX System Ozonation Cell is suitable for sanitisation, hygiene and disinfection. It can degrade and eliminate pollutants or harmful agents such as viruses, bacteria, mites, spores, moulds, insects and even toxic chemicals and unpleasant odours.
It is suitable for public sector, healthcare, food and hospitality/catering premises.
Due to its multipolar connection system, you can place multiple cells depending on the filtration demands and airflow. They are easy to assemble and disassemble: you simply need to slide them from their frame in the air handling unit. The integrated power electronic circuit comes with a LED that checks the correct operation of the filter.
It is available in 2 models FX 300 and FX 600. See the Technical Data here.
The cell uses the oxygen in the air. Through the use of a fan, the air flows into the machine where the “corona effect” takes place electronically separating oxygen molecules into atoms. The oxygen atom bonds with free molecules, thus creating ozone. In just a few minutes, the FX system generates enough ozone to saturate the environment. During this process, people must vacate the treated area.
Enquire about Ozonation Cell FX System
View our privacy policy.
Suitable for Commercial and Residential
Particle Filtration levels of up to 99.15% (PM10 ( ug/m2) and PM2.5 (ug/m2)
3 Technology types, the Nature System, AFC system and the Basic System
Silent
Infrared Remote Control gives the user full control and information on functions, performance, maintenance required, alarm light etc
Energy usage 95W to 125W
Available as free-standing or wheel mounted options
No installation required, simply plug and play
Additional options: Activated carbon filter and Extensive RAL colour range
Enquire about ProLife Air Purifiers – Commercial, Office, Restaurant, Hotel, Home, School/College
View our privacy policy.
Electronic single phase speed controllers.
Fuse protected + spare fuse included.
Minimum speed adjustment.
Single ON/OFF and speed regulation control knob.
Electronic single phase speed controllers.
Fuse protected + spare fuse included.
Minimum speed adjustment.
Single ON/OFF and speed regulation control knob.
Electronic single phase speed controllers.
Fuse protected + spare fuse included.
Minimum speed adjustment.
Single ON/OFF and speed regulation control knob
Electronic single phase speed controllers.
Fuse protected + spare fuse included.
Minimum speed adjustment.
Single ON/OFF and speed regulation control knob.
Remote speed controller
Enables the speed control of Ecowatt fans continuously, manually and remote.
Power supply: 1-230 V.
This product consists of a supply fan, exhaust fan, heat exchanger, main filter, activated carbon filter and HEPA filters. Quick and easy installation allows the product to be mounted and switched on in less than one hour, with the possibility to position the air flow on the back or on the side of the ReVent Wall. ReVent has the following functions:
• Supply air purification: external air coming from the fan passes
through the main filter and the heat exchanger; then, it is filtered
again by HEPA filter, in order to improve indoor air quality.
• Auto Mode: when Auto function is active, the fan speed will increase
automatically to ensure a sufficient quantity of fresh internal air.
• Timer Mode: it is possible to programme starting and turning offtimes by the included easy remote control.
• Sleep Mode: it allows to reduce the fan speed in order to reach
noiseless functioning.
• Pure Function: it allows to reach ultra-rapid air renewal.
The use of rooftop air conditioners represents the most economical and versatile solution for air conditioning in large and medium environments for service industry.
The RTSK series units ensure great versatility and are suitable for all installation needs. It is available a wide product range, with cooling capacity from 10 kW up to 310 kW, able to satisfy air conditioning requirements of small or very large volumes. The availability of accessories gives the series a great versatility and adaptability to the different requests of the projects. Strengths:
Respect for the environment: the use of R410A refrigerant allows to obtain good energy efficiency without harming the ozone layer (Ozone Depleting Potential = 0)
Easy installation: simple electrical and hydraulic connections are sufficient to start the unit.
Easy maintenance: access door to the inside components ensures safe maintenance when periodically checking the parts.
Comfort and climate control of the environment: the units features a microprocessor with a software specially designed and realized to plan and manage all functions.
Performance: scroll compressors allow better efficiency and reliability with low noise.
Enquire about ROOFTOP – Autonomous Air Handling Units
View our privacy policy.
Discount Only Available Online save 20%
SINGLE ROOM 3 SPEED HEAT RECOVERY UNIT C/W REMOTE CONTROL – AUTOMATIC HUMIDITY SENSOR, CERAMIC HEAT EXCHANGER
Maximum Airflow: 60m3/h
Maximum Noise output at 3m: 23db(A)
Operating Temperatures: -20°C to 50°C
EN 779 class filter: 2 x G3
Max Power Consumption: 8.9W
Power supply: 230V50HZ
Protection: IP44
RUCT is an energy recovery fan unit which extracts foul air outside and supplies fresh air into the room. The heat of the extracted air is recovered by the ceramic heat exchanger and transferred to the incoming fresh air.
RUCT is equipped with a highly efficient, energy saving brushless motor.
The heat exchanger has a thermal efficiency rate up to 93% guaranteeing high performance.
Discount Only Available Online save 20%
The Sinteyes is commercial air filtration system available in 2 models for wall or ceiling. It is silent and has a sleek, attractive design. It is highly efficent and comes with an infrared remote control.
Enquire about Sinteyes – commercial air filtration
View our privacy policy.
The SPH and SPH-MINI dual flow refrigerant air dehumidifiers satisfy the specific needs of indoor pools, wellness centers and SPAS, creating temperature and humidity conditions that ensure a good level of comfort for users and protect the building structure against possible damages due to water evaporation. The coupling of heat pipes static recovery to the cooling circuit allows to optimize power consumption with a certain energy savings. The transfer of excess heat to pool water, via additional plate condenser, allows to limit energy waste.
The wide range, with airflow from 1.000 mc/h to 32.000 mc/h, allows the air-conditioning of environments with different volumes, from small wellness center to olympic swimming pools.
The availability of many accessories gives the series versatility and adaptability to specific projects requests.
Enquire about SPH, SPH-MINI – Swimming Pools Dehumidifiers
View our privacy policy.
Horizontal and Vertical Air Dehumidifiers SPO- SPV
The SPO horizontal and SPV vertical refrigerant air dehumidifiers are suitable for specific needs of indoor pools, creating temperature and humidity conditions that ensure a pleasant environment for users and protect the building structure against possible damage due to the evaporation of water.
The wide range, with airflow from 1.000 mc/h to 9.000 mc/h, allows the air-conditioning of environments from small to medium volumes. There are many accessories available in this versatile and adaptable series.
Enquire about SPO- SPV – Horizontal and Vertical Air Dehumidifiers
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-250-H-230V50Y60HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-315-H-230V50Y60HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-355-H-230V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-400-H-230V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-450-H-230V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-500-H-230V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-560-H-230V50HZ Cylindrical cased axial flow fan NOT SPEED CONTROLLABLE
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBB-4-630-L-230V50HZ Cylindrical cased axial flow fan NOT SPEED CONTROLLABLE
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-250-H-400V50Y60HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-315-H-400V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-355-H-400V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-400-H-400V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-500-H-400V50HZ Cylindrical cased axial flow fan
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-560-H-230-400V50HZ Cylindrical cased axial flow fan SPEED CONTROLLABLE BY VSD ONLY
View our privacy policy.
Range of cylindrical cased axial flow fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataphoresis primer and black polyester paint finish.
All models are supplied with pre-wired junction box located on the outside of the fan casing for easy access.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
Single phase motor (TCBB) or three phase motor (TCBT).
Models 250, 315, 355 and 400: External rotor motor, IP44, Class F, thermal protection, working temperature from -40ºC to +40ºC.
Models 450, 500, 560, 630 and 6/710: IP65, Class F, thermal protection, working temperature from -40ºC to +70ºC making them suitable for commercial kitchen extraction
Models 4/710 and 800: IP55, Class F, working temperature from -40ºC to +40ºC.
All motors are speed controllable by autotransformer except models /4-560H, /4-630, 710 and T/800.
Three phase motors are speed controllable by inverter.
Electrical supplies:
Single phase 230V-50Hz.
(Capacitor located inside the wiring terminal box).
Three phase 230/400V-50Hz or 400V-50Hz.
Enquire about TCBT-4-560-H-400V50HZ Cylindrical cased axial flow fan
View our privacy policy.
